Delrin CNC Machining for Drawing-Specified Acetal Parts
Baosheng manufactures CNC machined parts from customer-specified Delrin, acetal homopolymer, or approved acetal equivalents for bushings, rollers, gears, spacers, sleeves, bearing blocks, wear pads and precision mechanical plastic assemblies.
Send your drawing, material callout or project notes. We review exact grade requirements, approved equivalent rules, color, filled material, bores, OD/ID, shaft fits, press fits, gear features, sliding surfaces, burr-free areas and inspection requirements before quoting.
CAD Optional for First Review
Project notes are enough for an initial capability check. NDA is available before file review.
Material Rule First
We confirm whether exact Delrin is required or an approved acetal equivalent is allowed.
Fit Details Matter
Clearance, press fit, slip fit, shaft fit and mating material should be defined when possible.
Wear Surfaces Marked
Gear teeth, bores, roller surfaces and sliding faces should be identified before production.
Quote faster with:
Material callout, quantity, color, OD/ID, fit type, running surface, gear details and inspection notes.
Not sure about Delrin vs POM?
Use this page when Delrin or acetal homopolymer is specified. Use POM review when material is still open.
Confidential drawings?
NDA support is available before confidential CAD files, drawings or product documents are reviewed.
Material Callout
Confirm Delrin Material Requirements Before Quoting
Some projects require an exact Delrin material callout, while others allow an approved acetal homopolymer equivalent. Before quoting, Baosheng reviews the drawing, material specification, color, filled grade, material certificate expectations when specified, traceability needs and substitution rules so the quoted material matches the project requirement.
Exact Delrin Required
Use this route when the drawing, purchasing document or customer specification requires Delrin, a specific acetal homopolymer grade, color or filled material.
- Exact grade requirement
- Color or filled material
- Certificate expectations if required
- Traceability needs
Approved Equivalent Allowed
Use this route when an equivalent acetal homopolymer can be reviewed, but substitution must be approved before production.
- Equivalent approval
- Material availability
- Cost and lead time review
Material Can Be Reviewed
Start with broader POM material review when POM-C, POM-H, filled acetal, color, availability or cost options are still being compared.
- POM-C vs POM-H
- Filled acetal options
- General acetal comparison
Another Plastic May Fit Better
Review nylon, PTFE, PEEK or ABS when toughness, chemical resistance, extreme low friction, high temperature or housing appearance matters more than acetal homopolymer stiffness.
- Wear vs toughness
- Temperature and chemical exposure
- Appearance or housing needs
Fit & Motion Review
Delrin Parts Are Quoted Around Functional Features
For Delrin components, the key cost and quality drivers are usually not the outside shape alone. Bores, OD/ID, gear teeth, shaft fits, sliding surfaces, edge condition and running surfaces should be reviewed before production.
Bores, OD/ID and Shaft Fits
Bushings, sleeves, rollers and bearing blocks depend on bore quality, clearance, concentricity, chamfer control and assembly feel.
Bore diameter · OD/ID · Shaft fit · Press fit · Slip fit · Concentricity
Gears, Wear Faces and Running Surfaces
Gear teeth, roller OD, sliding faces and wear pads should be marked clearly so burr control, tool path and inspection can be planned.
Tooth profile · Running OD · Sliding face · Burr-free edge · Load / speed · Mating material
Part Families
Custom Delrin Parts We Machine
Baosheng supports customer-specified Delrin and approved acetal homopolymer parts where material callout, low friction, high stiffness, clean bores, stable fits and burr-free mechanical surfaces matter.
Bushings, Sleeves & Spacers
Round acetal homopolymer parts requiring bore quality, OD/ID control, chamfers and assembly fit. Bore · OD/ID · Chamfer · Shaft fit
Rollers, Guides & Wear Pads
Low-friction components requiring running surface control, edge break, clearance and wear review. Running surface · Wear face · Clearance · Deburring
Gears, Bearing Blocks & Motion Parts
Functional mechanical plastic parts requiring material review, tooth features, bore features, datum faces and inspection planning. Gear teeth · Flatness · Datum · Burr control
Material Options
Delrin, Acetal Homopolymer and Approved Equivalents
If the drawing specifies Delrin, exact material expectations should be confirmed before quotation. If substitution is allowed, an approved acetal homopolymer equivalent can be reviewed based on availability, color, performance, material documentation expectations and project requirements.
For projects where the material is not fixed, start with broader POM CNC machining review to compare acetal copolymer, acetal homopolymer, filled acetal and cost or availability options. Delrin is referenced here when it is specified by the drawing or purchasing document.
Exact Delrin Callout
For drawings or purchasing documents that require Delrin, specified grade, color or filled material.
Approved Acetal Equivalent
For projects where an equivalent acetal homopolymer can be reviewed and approved before production.
Black / Natural Acetal
For visual, handling, inspection or assembly requirements where color matters.
Filled Acetal Review
For lower-friction or modified wear behavior when the drawing or application calls for it.
Production Review
From Material Callout to Finished Mechanical Plastic Part
Delrin projects are reviewed as a practical production sequence so material rules, fit requirements, running surfaces and inspection criteria are confirmed before machining begins.
1.Callout
Exact Delrin, acetal homopolymer or approved equivalent rule reviewed.
2.Stock
Color, filled material, rod, plate or sheet availability checked.
3.Fit
Shaft fit, press fit, slip fit, clearance and mating material reviewed.
4.Machining
CNC turning, milling, drilling and gear or bore features planned by geometry.
5.Edges
Chamfers, burr-free zones, sliding edges and gear teeth reviewed.
6.Inspection
OD/ID, bore, gear features, running surfaces, datums and fit checked.
Application Proof
Delrin Machining Case Examples
These examples show how material callout, fit control and functional surfaces affect practical Delrin machining requests from prototype review to repeat batches.
Natural Delrin Bushing Set
A customer needed a repeat batch of acetal homopolymer bushings for a shaft assembly. The review focused on stable bore diameter, consistent OD and clean internal edges.
- Review focus
- Material callout, bore depth, shaft clearance, chamfer size and burr-free edge condition.
- Inspection focus
- Bore diameter, OD, length, chamfers, edge condition and assembly fit.
Black Acetal Bearing Block
A mechanical assembly project required a black acetal bearing block with accurate bore location, stable mounting faces and burr-free assembly edges.
- Review focus
- Datum strategy, bore sequence, face flatness, edge break and inspection method.
- Inspection focus
- Bore position, bore diameter, flatness, hole pattern and edge condition.
Delrin Gear Prototype
- Review focus
- Tooth profile, hub geometry, tool access, bore tolerance and burr-sensitive edges.
- Inspection focus
- Tooth features, bore diameter, OD, hub thickness and burr condition.
Material Choice
Not Sure If Delrin Is the Right Plastic?
Delrin is not always the best choice. The right plastic depends on friction, wear, moisture exposure, toughness, chemical resistance, temperature, appearance, cost and whether the drawing allows material substitution.
POM / Acetal Family
Use the broader POM / acetal route when material is not fixed and copolymer, homopolymer or filled acetal options are still open.
Nylon
Review nylon machining when toughness, impact resistance or selected wear behavior matters more than moisture stability.
PTFE
Review PTFE machining when extreme low friction or chemical resistance is more important than stiffness.
PEEK
Review PEEK machining when high-temperature or high-performance requirements justify higher material cost.
Your questions answered
Delrin CNC Machining FAQs
Is Delrin the same as POM?
Delrin is commonly associated with acetal homopolymer, while POM can refer to a broader acetal family including copolymer and homopolymer grades. If the drawing specifies Delrin, the exact grade or approved equivalent rule should be reviewed before quoting so the material does not drift from the purchasing requirement.
Is Delrin good for CNC machining?
Yes. Customer-specified Delrin and approved acetal homopolymer equivalents machine cleanly and are commonly used for bushings, rollers, gears, spacers, sleeves, wear pads, sliding blocks and precision mechanical plastic parts.
Can Delrin be used for bushings and rollers?
Yes. Delrin can be reviewed for bushings, sleeves, rollers and bearing-style parts where bore quality, OD/ID, shaft fit, chamfers and burr control matter.
Can Delrin be used for gears?
Yes. Delrin can be reviewed for gear prototypes and selected low-load gear components. Tooth profile, bore tolerance, operating load, speed and burr control should be reviewed before machining.
Can you use an approved acetal equivalent?
Yes, when the drawing or purchasing requirement allows it. The approved equivalent rule should be confirmed before production so the quoted material matches the project requirement.
Do I need to upload CAD files?
CAD files are recommended for accurate quoting, but they are not required for the first capability check. Project notes are enough to start a preliminary review.
Can you sign an NDA before reviewing drawings?
Yes. NDA support is available before confidential CAD files, drawings or product information are reviewed.
Request a Delrin Machining Quote
Send CAD files, drawings or project notes with the customer-specified customer-specified Delrin grade, approved equivalent rule, color, quantity, bore, OD/ID, shaft fit, press fit, slip fit, gear feature, sliding surface, burr-free area and inspection requirements. CAD files are recommended for accurate quoting, but they are not required for the first capability check. NDA support is available before confidential file review.
- NDA available before drawing review
- Exact Delrin or approved acetal equivalent review
- Bore, OD/ID, shaft fit, press fit and slip fit DFM review
- Gear, roller, bushing and wear surface inspection review
- Prototype, pilot batch and repeat production support
Visit us
308, Building A, Chang'an Zhigu, Annex Building, No. 199 Shajiang Road, Xitou Community, Songgang Street, Bao'an District, Shenzhen, Guangdong, China.
Email Us
in**@*********nd.com
Call Us/Whatsapp
+86 17727904392
🔒 All uploads encrypted · Free DFM included · No commitment required